HOUSING HIGH RELIABILITY

INTEGRATED POWER SUPPLY (IPS)

INTEGRATED POWER SUPPLY (IPS)

ASG Powers The Sky

The Integrated Power Supply (IPS) is constructed from aviation grade aluminum and houses high reliability DC-DC and EMI circuitry with current limit protection, short circuit protection, input under voltage lockout, soft start output and inhibit shutdown. The IPS is a 5 volt 3 amp power source. It has two D-Sub mating connectors, one to mate with the Connector Docking Assembly (CDA) and the other for input connection of 28vdc, grounds, USB or RS232 from the aircraft systems. The IPS will also have a manual power interrupt via an Annunciator On/Off switch conveniently located within the cockpit. The IPS may also be used as a standalone power supply.

iPad IPS

The Integrated Power Supply (IPS)-iPad is an on-board Apple iPad charger designed to charge your iPad. It also meets IAW Apple iPad charging criteria for maximum charging capabilities.

View more details

USB + iPad IPS

The Integrated Power Supply (IPS)-iPad is an on-board Apple iPad charger designed to charge your iPad. It also meets IAW Apple iPad charging criteria for maximum charging capabilities.  There is an added USB port for charging and additional device.

View more details

FZG1 IPS

The Integrated Power Supply (IPS) – FZ-G1 is an on-board charger designed to charge the Panasonic Toughpad FZ-G1.  The unit meets Panasonic’s charging requirements for maximum charging capabilities.

View more details

USB Charger Port

The USB Charger Port is an on-board USB Port that will charge any device using a 2.0 USB port .  It also meets IAW Apple iPad charging criteria for maximum charging capabilities.

View more details

Compare Models

Part Number: 213013-1 Meets EASA TGL-36 Requirements
Meets FAA AC 120-76B
Meets MIL-STD-461 “EMI” Standards
RTCA DO-160G: Section 7(B), 8(S), 15(A), 17(B), 18(R), 19(BCX), 20(TT), 21(MM), 25(A)

P/N: M24308/4-1F:

  • Pin 1 – Power 28VDC,
  • Pin 2 – Ground
  • Pin 3 – Chassis
  • Pin 4 – Inhibit

P/N: M24308/2-1F:

  • Pin 1 – Power 5.2VDC @ 15W Max
  • Pin 2 – Ground
  • Pin 3 – Chassis
  • Pin 4 – Sense (-) White
  • Pin 5 – Sense (+) Green

Avionics Support Group is an Apple MFI Developer.

Compatibility: Works with all iPad models

View more details
Part Number: 213013‐2 Meets EASA TGL‐36 Requirements
Meets FAA AC 120‐76B
Meets MIL‐STD‐461 “EMI” Standards
RTCA DO‐160G: Section 7(B), 8(S), 15(A), 17(B), 18(R), 19(BCX), 20(TT), 21(MM), 25(A)

P/N: M24308/4‐1F

  • Pin 1 – Power 28VDC,
  • Pin 2 – Ground
  • Pin 3 – Chassis
  • Pin 4 – Inhibit

P/N: M24308/2‐1F

  • Pin 1 – Power 5.2VDC @ 30W Max
  • Pin 2 – Ground
  • Pin 3 – Chassis
  • Pin 4 – Sense (‐) White
  • Pin 5 – Sense (+) Green

J3: Standard USB 2.0 Port (for charging ONLY)

28VDC @ 1.3 AMP Max ‐ Over Voltage Protection 5.2VDC @ 30W Max ‐ Short Circuit Protection ‐ Over Current Limiter (IAW Apple MFI) 3.25” (8.3cm) L x 2.25” (5.7cm) W x 1” (2.5cm) H Weight: 8.2oz/233g ‐ Aviation Grade Aluminum Housing(6061‐T6) 8 Feet/ 2.4384 Meters ‐ Maximum distance between IPS and Tablet Mounting Holes: Four (4) each # 4 ‐ 40

Avionics Support Group is an Apple MFI Developer

Compatibility: Works with all iPad models

View more details
Part Number: 213013-3 Meets EASA TGL-36 Requirements
Meets FAA AC 120-76B
Meets MIL-STD-461 “EMI” Standards
RTCA DO-160G: Section 7(B), 8(S), 15(A), 17(B), 18(R), 19(BCX), 20(TT), 21(MM), 25(A)

P/N: MS27508E8F98P

  • Power
  • Ground
  • Chassis

P/N: M24308/2-1F

  • Power
  • Ground
  • Sensor

Installation Screws directly onto the IPS

Inputs 28VDC - Over Voltage Protection Outputs 16VDC @ 100W Max - Short Circuit Protection, Over current Limiter 3.25”(8.255cm) L x 2.25” (5.715cm) W x 1” (2.54cm) H 8oz/227g - Aviation Grade Aluminum Housing (6061-T6) Screws directly onto the IPS

Meets with Panasonic Toughpad Charging Requirements

Works with Toughpad FZ-G1

Mounts directly to the back of ASG Cradle – FZG1 P/N 213014-4

View more details
Part Number: View more details